50 Years of Bong-Han Theory and 10 Years of Primo Vascular System

The primo vascular system (PVS) was first introduced by Bong-Han Kim via his five research reports. Among these the third report was most extensive and conclusive in terms of the PVS anatomy and physiology relating to the acupuncture meridians. His study results, unfortunately, were not reproduced by other scientists because he did not describe the materials and methods in detail. In 2002, a research team in Seoul National University reinitiated the PVS research, confirmed the existence of PVS in various organs, and discovered new characteristics of PVS. Two important examples are as follows: PVS was found in the adipose tissue and around cancer tissues. In parallel to these new findings, new methods for observing and identifying PVS were developed. Studies on the cell and material content inside the PVS, including the immune function cells and stem cells, are being progressed. In this review, Bong-Han Kim’s study results in his third report are summarized, and the new results after him are briefly reviewed. In the last section, the obstacles in finding the PVS in the skin as an anatomical structure of acupuncture meridian are discussed

Atomic Resolution Imaging of Rotated Bilayer Graphene Sheets Using a Low kV Aberration-corrected Transmission Electron Microscope

Modern aberration-corrected transmission electron microscope (TEM) with appropriate electron beam energy is able to achieve atomic resolution imaging of single and bilayer graphene sheets. Especially, atomic configuration of bilayer graphene with a rotation angle can be identified from the direct imaging and phase reconstructed imaging since atomic resolution Moir pattern can be obtained successfully at atomic scale using an aberration-corrected TEM. This study boosts a reliable stacking order analysis, which is required for synthesized or artificially prepared multilayer graphene, and lets graphene researchers utilize the information of atomic configuration of stacked graphene layers readily.ope

The Characteristics of Action Potentials in Primo Vessels and the Effects of Acetylcholine Injection to the Action Potentials

In a previous study, we found that Primo vessels generate different action potentials in smooth muscles, but this study compared the pulse shape to distinguish the two tissues. Thus, a more sophisticated extracellular experiment was performed in this study using an acetylcholine injection; we then observed changes in the amplitude, FWHM (full width at half maximum), and period to explore Primo vessel function. A third type of pulse was recorded for Primo vessels. We observed fast depolarizing and repolarizing phases for this pulse. Further, its FWHM was 30 ms between smooth muscles and neurons. Acetylcholine affected only the period. The amplitude and FWHM were consistent after injection. Primo-vessels generated action potentials at twice the frequency after injection. From the results, we speculate that Primo-vessels perform a role in transferring signals in a different manner, which may be relevant for acupuncture treatment

Molecular cloning and biochemical characterization of a novel erythrose reductase from Candida magnoliae JH110

<p>Abstract</p> <p>Background</p> <p>Erythrose reductase (ER) catalyzes the final step of erythritol production, which is reducing erythrose to erythritol using NAD(P)H as a cofactor. ER has gained interest because of its importance in the production of erythritol, which has extremely low digestibility and approved safety for diabetics. Although ERs were purified and characterized from microbial sources, the entire primary structure and the corresponding DNA for ER still remain unknown in most of erythritol-producing yeasts. <it>Candida magnoliae </it>JH110 isolated from honeycombs produces a significant amount of erythritol, suggesting the presence of erythrose metabolizing enzymes. Here we provide the genetic sequence and functional characteristics of a novel NADPH-dependent ER from <it>C. magnoliae </it>JH110.</p> <p>Results</p> <p>The gene encoding a novel ER was isolated from an osmophilic yeast <it>C. magnoliae </it>JH110. The ER gene composed of 849 nucleotides encodes a polypeptide with a calculated molecular mass of 31.4 kDa. The deduced amino acid sequence of ER showed a high degree of similarity to other members of the aldo-keto reductase superfamily including three ER isozymes from <it>Trichosporonoides megachiliensis </it>SNG-42. The intact coding region of ER from <it>C. magnoliae </it>JH110 was cloned, functionally expressed in <it>Escherichia coli </it>using a combined approach of gene fusion and molecular chaperone co-expression, and subsequently purified to homogeneity. The enzyme displayed a temperature and pH optimum at 42°C and 5.5, respectively. Among various aldoses, the <it>C. magnoliae </it>JH110 ER showed high specific activity for reduction of erythrose to the corresponding alcohol, erythritol. To explore the molecular basis of the catalysis of erythrose reduction with NADPH, homology structural modeling was performed. The result suggested that NADPH binding partners are completely conserved in the <it>C. magnoliae </it>JH110 ER. Furthermore, NADPH interacts with the side chains Lys252, Thr255, and Arg258, which could account for the enzyme's absolute requirement of NADPH over NADH.</p> <p>Conclusions</p> <p>A novel ER enzyme and its corresponding gene were isolated from <it>C. magnoliae </it>JH110. The <it>C. magnoliae </it>JH110 ER with high activity and catalytic efficiency would be very useful for <it>in vitro </it>erythritol production and could be applied for the production of erythritol in other microorganisms, which do not produce erythritol.</p

Psychometric properties of a short self-reported measure of medication adherence among patients with hypertension treated in a busy clinical setting in Korea.

BackgroundWe examined the psychometric properties of the Korean version of the 8-item Morisky Medication Adherence Scale (MMAS-8) among adults with hypertension.MethodsA total of 373 adults with hypertension were given face-to-face interviews in 2 cardiology clinics at 2 large teaching hospitals in Seoul, South Korea. Blood pressure was measured twice, and medical records were reviewed. About one-third of the participants (n = 109) were randomly selected for a 2-week test-retest evaluation of reliability via telephone interview.ResultsInternal consistency reliability was moderate (Cronbach α = 0.56), and test-retest reliability was excellent (intraclass correlation = 0.91; P &lt; 0.001), although a ceiling effect was detected. The correlation of MMAS-8 scores with scores for the original 4-item scale indicated that convergent validity was good (r = 0.92; P &lt; 0.01). A low MMAS-8 score was significantly associated with poor blood pressure control (χ(2) = 29.86; P &lt; 0.001; adjusted odds ratio = 5.08; 95% CI, 2.56-10.08). Using a cut-off point of 6, sensitivity and specificity were 64.3% and 72.9%, respectively. Exploratory factor analysis identified 3 dimensions of the scale, with poor fit for the 1-dimensional construct using confirmatory factory analysis.ConclusionsThe MMAS-8 had satisfactory reliability and validity and thus might be suitable for assessment and counseling regarding medication adherence among adults with hypertension in a busy clinical setting in Korea

Exploration of New Electroacupuncture Needle Material

Background. Electro Acupuncture (EA) uses the acupuncture needle as an electrode to apply low-frequency stimulation. For its safe operation, it is essential to prevent any corrosion of the acupuncture needle. Objective. The aim of this study is to find an available material and determine the possibility of producing a standard EA needle that is biocompatible. Methods. Biocompatibility was tested by an MTT assay and cytotoxicity testing. Corrosion was observed with a scanning electron microscope (SEM) after 0.5 mA, 60 min stimulation. The straightness was measured using a gap length of 100 mm, and tensile testing was performed by imposing a maximum tensile load. Results. Phosphor bronze, Ni coated SS304, were deemed inappropriate materials because of mild-to-moderate cytotoxicity and corrosion. Ti-6Al-4V and SS316 showed no cytotoxicity or corrosion. Ti-6Al-4V has a 70 times higher cost and 2.5 times lower conductivity than SS316. The results of both straightness and tensile testing confirmed that SS316 can be manufactured as a standard product. Conclusion. As a result, we confirmed that SS316 can be used a new EA electrode material. We hope that a further study of the maximum capacity of low-frequency stimulation using an SS316 for safe operation

Isolation of human Dna2 endonuclease and characterization of its enzymatic properties

In eukaryotes, the creation of ligatable nicks in DNA from flap structures generated by DNA polymerase δ-catalyzed displacement DNA synthesis during Okazaki fragment processing depends on the combined action of Fen1 and Dna2. These two enzymes contain partially overlapping but distinct endonuclease activities. Dna2 is well-suited to process long flaps, which are converted to nicks by the subsequent action of Fen1. In this report, we purified human Dna2 as a recombinant protein from human cells transfected with the cDNA of the human homologue of Saccharomyces cerevisiae Dna2. We demonstrated that the purified human Dna2 enzyme contains intrinsic endonuclease and DNA-dependent ATPase activities, but is devoid of detectable DNA helicase activity. We determined a number of enzymatic properties of human Dna2 including its substrate specificity. When both 5′ and 3′ tailed ssDNAs were present in a substrate, such as a forked-structured one, both single-stranded regions were cleaved by human Dna2 (hDna2) with equal efficiency. Based on this and other properties of hDna2, it is likely that this enzyme facilitates the removal of 5′ and 3′ regions in equilibrating flaps that are likely to arise during the processing of Okazaki fragments in human cells

Current Studies of Acupuncture in Cancer-Induced Bone Pain Animal Models

Acupuncture is generally accepted as a safe and harmless treatment option for alleviating pain. To explore the pain mechanism, numerous animal models have been developed to simulate specific human pain conditions, including cancer-induced bone pain (CIBP). In this study, we analyzed the current research methodology of acupuncture for the treatment of CIBP. We electronically searched the PubMed database for animal studies published from 2000 onward using these search terms: (bone cancer OR cancer) AND (pain OR analgesia) AND (acupuncture OR pharmacopuncture OR bee venom). We selected articles that described cancer pain in animal models. We analyzed the methods used to induce cancer pain and the outcome measures used to assess the effects of acupuncture on CIBP in animal models. We reviewed articles that met our inclusion criteria. Injection of mammary cancer cells into the cavity of the tibia was the most frequently used method for inducing CIBP in the animal models. Among the eight selected studies, five studies demonstrated the effects of electroacupuncture on CIBP. The effects of acupuncture were assessed by measuring pain-related behavior. Future researches will be needed to ascertain the effectiveness of acupuncture for treating CIBP and to explore the specific mechanism of CIBP in animal models

Mathematical Distinction in Action Potential between Primo-Vessels and Smooth Muscle

We studied the action potential of Primo-vessels in rats to determine the electrophysiological characteristics of these structures. We introduced a mathematical analysis method, a normalized Fourier transform that displays the sine and cosine components separately, to compare the action potentials of Primo-vessels with those for the smooth muscle. We found that Primo-vessels generated two types of action potential pulses that differed from those of smooth muscle: (1) Type I pulse had rapid depolarizing and repolarizing phases, and (2) Type II pulse had a rapid depolarizing phase and a gradually slowing repolarizing phase

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium

Objective: This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration.&nbsp;Methodology: Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination.&nbsp;Results: Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the ca p. Conclusion: The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation